Skil 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

I bought this for a special job site. The price was great and it got the job done with precision. I like how compact it is and easy to take from job to job.

Super impressed with this tile saw. I was worried because the only tile saw I’ve used in the past was a rented professional grade tile saw. This one was just as easy to use. I needed the 45 degree ability for several of my cuts to “miter” small pieces to create edge pieces, and this worked perfect for it. I’ve already recommended to several friends. Super great value for the price, excellent quality, and really easy to setup and use.

It’s just ok. All plastic, easily bogs if you try to cut too fast. Of course the table doesn’t move, you have to push the tile through. Make sure you install the water guard safety on top, or you will get soaked. Would I buy it again. Probably not. I would spend a little more for a higher quality saw.

Killer little tile saw that has gotten me through a shower, a tub surround and 2 floors and a kitchen full backsplash! Next, a kitchen floor. Everything from a thick ceramic plank, marble mosaic, porcelain to subway. The one drawback is the tile size. If you have to rip anything longer than 7 inches, you have to go at it from both ends, and if its 32" plank you will have an -1/8" offset from the blade hood hinge getting in the way and the water reservoir is small. But at this price? As long as you change the blade before a new project, it's been awesome! Next up- the kitchen floor. I like that it's compact, easy to hose off and store on a shelf in the garage.

The SKIL 7-Inch Wet Tile Saw (3540-02) has been an absolute lifesaver for my home renovation projects. This tool delivers professional-level precision at an affordable price, making it perfect for DIYers and hobbyists. What I Love About It: Accurate Cutting: The saw’s adjustable rip fence with a miter gauge ensures precise straight and diagonal cuts. I used it for various tile sizes and shapes, and every cut came out clean and accurate. Perfect for intricate tile designs or fitting around corners. Powerful Performance: The 4.2-amp motor is powerful enough to handle ceramic, porcelain, and even natural stone tiles with ease. It didn’t bog down or struggle, even with thicker materials. Built-In Cooling System: The water reservoir is a game-changer. It keeps the blade cool, reduces dust, and minimizes tile chipping, ensuring smooth cuts every time. Plus, it’s easy to refill and maintain during extended use. Durable and Compact Design: The corrosion-resistant stainless-steel top is sturdy and provides a stable workspace. Despite its durability, the saw is compact and lightweight, making it easy to transport and store. Bevel Capability: The adjustable bevel allows for cuts at 0, 22.5, and 45 degrees, which is perfect for achieving professional-looking finishes on edges and corners. Great Value for the Price: For the quality and performance, this saw is a bargain. It’s ideal for small to medium-sized tiling projects and saves a ton of money compared to hiring professionals. Why I Recommend It: This wet tile saw is a must-have for any DIY enthusiast tackling tiling projects. It’s easy to use, efficient, and delivers precise results without breaking the bank. Whether you’re remodeling a bathroom, installing a kitchen backsplash, or laying a new floor, the SKIL 3540-02 will help you get the job done beautifully. Highly recommend this tool—it’s reliable, well-made, and a pleasure to work with!

As a professional contractor, I really didn't expect much from this saw, as I have tried many saws over the last 30 years to know you need a good motor, blade, and steady plate to cut porcelain and glass without chipping. By the literature, this unit has an undersized motor, non-rubberized plate, plastic ends and body, and no name blade. So, you have to expect that you get what you pay for. However, my goal through the years was to have something portable enough to carry down flights of stairs, big enough to cut 12x12 porcelain and glass tile, strong enough to last more than one job, and absolutely non-dripping! Well, This is the one to buy. There are two models, and this one with water lock is the better model, although twice the cost. So, read the other reviews and you'll see this all confirmed. What I include here is a workaround and suggestions for improvement. 1. The blade guard...Great working device with a rubber seal that keeps water to zero IF you are not cutting a tile. I fixed the screw area problem that attaches it to the table by recessing the screw heads. Next I used duct tape looped over the front air exhaust so water goes back down the table and not up in my face or over the table. It wouldn't be difficult or costly if Skill added these two design fixes in their next revision, especially for the price. 2. The blade...it's a basic blade, so don't bother using it. Get a decent one for your tile job. I used a widow. 3. The motor...it is a bit under amperage as I know it won't last as long as my 12 and 15 amp units, and won't cut as fast. However, I don't know that one that powerful could fit in such a small footprint, or be as light. I do know a 7 amp would be my expectation and would not add a considerable amount of weight, and would be considered a great value for the price point they had this one for ($135), 4. The plastic body is very strong and I had no problems even when stressing it. 5. The top...it is like a teflon coated top, but I don't know for sure. It held up well for the three backsplashes I have done since buying it last month. Time will tell if it starts to rust, but I oil it after every use, so it should be minimized. If Skil were to add a 1mm hard rubber/plastic film, it would be awesome as tiles would still slide,cthe table would be protected, and it wouldn't be tile against metal. 6. The extension arm--yes, it's plastic, but it is sturdy and does the job well! Don't try cutting 36" floor tile as it will bind the saw and give a poor cut--but hey, that's why I put it to the test! 7. The switch..I think it is too difficult to turn on and off each time you make a cut, because of the thick rubber cover it has, but it does the job it's suppoed to do in making it safe! I would either add a bigger switch to use with gloves, or add a more protruding toggle. 8. The unit was easy to clean, but a simple tool storage, aside from drying the unit out and putting it inside the well would be useful. There is room on the tool or the extendion for this to happen. 9. Add an extra brush for the blade. I have not seen where to purchase replacements yet!

The Saw Works. Wouldn't use for big jobs (obviously). The slide and fence are a little sticky, not super reliable for guidance on tiles that are not square, but you get the hang of it. Start on easy cuts. It comes with a blade, which is awesome at this price. The blade is quality for a small job Read the instructions, there are a few things in there that are helpful.

I received the item as described works very well nice & smooth not lowed at all very pleased with the results 100% Cheers

En ocasiones esta cortadora esta a un super precio, yo compre una y me duro unos 3 o 4 años de trabajo muy intenso en la remodelación de mi casa. Recientemente dejo de funcionar el motor y adquirí la 2da, confirmo que la calidad, relación costo-beneficio y el desempeño continuan siendo muy buenos. Provee cortes muy precisos contra los cortadores tradicionales, el disco que incluye dura un buen tiempo antes de tener que ser reemplazado, lo único que no me agrada es que si salpica mucha agua al utilizarlo aunque la mayoría de estos cortadores lo hacen. Al momento de mi compra encontré este equipo era el de mejor precio contra los ofertados en otras tiendas y sitios web. Lo recomiendo.

Este modelo salió muy bueno para cortar el azulejo y par los diferentes ángulos

BON PRODUIT NO 1