929T Tee-Handle

When your windows have the manufacturers large 4" to 6" cranks, these are the perfect solution - I call them "toggles". They are the solution for allowing blinds to drop to the sill without getting caught/lifted by the crank, verticals to close uniformly without catching on the protruding 4" to 6" crank. The toggles are especially important for any window where the window treatment is an "inside installation" - which is often the case when windows are recessed allowing for any decorative/privacy treatment to be neatly installed "inside" - and therefore, not protruding into the room. I've always used white matching the trim. However, they're easily painted if color is the answer. And brown is available for wood trimmed windows. Delivery came quickly. "Toggles" are definitely the answer to windows with crank handles.

It fits and does exactly as described. They are very tiny. The smallest ones I've seen, but they work so can't really complain. It just looks weird as they are very small compared to ones at the store.

Easy to screw in place ..stays snug. Good quality metal

I purcharsed these as a replacement for the large crank handle on my crank out windows, due to the fact that I have pull down blinds and the large single crank handle sticks out so far that I can't nicely pull down the blind to the bottom of rhe window. Here are my issues and why I gave these only 3 stars: 1) The Set Screws... I had all kinds of issues with the set screws. I don't know if it's bad manufacturing or the way they are painted but the first one I took out of the package I couldn't get the set screw to turn. (I eventually got a bigger screw driver and was able to break the screw loose) I took out a second one and the set screw popped out while I was taking it out of the packagee. I waisted 40 minutes trying to get the set screw back in before I gave up. The third one was again hard to unscrew but I managed to unscrew the set screw and install it. So just a warning, you need a good screw driver with a grip handle on it. I have still not been able to reinstall the set screw on the second handle. What a hassle 2) These are small. The ones I received measure just about 2 1/8 inches wide from tip to tip of the wings. They don't look correct when attached to the cranking block of a normal crank out window, they look out of proportion. I would have preferred something in the 3 to 4 inch range. I'd claim this is my bad for not reading all of the questions and answers, but I saw the item dimensions listed and assumed these were in the 3 to 4 inch range. The item dimensions listed are the dimensions of the package that contain the 4 handles, nothing to do with the items themselves. Seriously why can't you sellers clearly put the measurements that matted to the buyer, on your listings. They do seem to be metal and sturdy. I just install mine and haven't really tried opening the window (it's freezing cold here right now). If I have further issues with them breaking or not working in other ways, I will revise my review.

Easy to install, fit very nice. They are small but with my “Anderson” windows they are easy to open. I really got them so my toddlers in my bay window didn’t mess up the longer handles. They did the job!

Garbage. Falls of all the time. No matter how much you tight it

Had shutters added to windows and had to change the crank handles to these. They work great and are lower profile. Easy to install.

These are perfect for my windows. I like the size. They are big enough to easily open and close the window, while staying out of the way of my blinds. Window crank mechanisms can be damaged by over-torquing the crank, so I like that these are not too big, reducing that risk. I thought about doing folding cranks, but these are much cleaner and nicer, which is reflected in the reviews. One note is that I had no issues at all with the set screws. It's true that they are painted in place, but they broke free easily. All in all, a big thumbs up.

I needed replacement handles for a few casement windows in my home and this T-handle pack was exactly what I was looking for. These cranks fit standard 11/32” spline shafts perfectly, and installation was very straightforward — just loosen the set screw, slide them on, and tighten. No complicated hardware or tools needed. The Home Depot The white finish blends nicely with most window frames and doesn’t stand out too much, so even with blinds down they look clean and unobtrusive. The Home Depot The T-handle design also makes them easy to grip and turn — I found they require slightly less effort than my old handles when opening or closing the windows. Ideal Inc. Pros: Excellent fit for 11/32” splines — works on all the windows I tried. The Home Depot Easy install (just a screwdriver needed). Ideal Security Inc 4-pack is good value if you have multiple windows to update. The Home Depot Simple, clean white look that matches most interiors. The Home Depot Cons: The finish is basic — if you want premium or decorative handles, these are utilitarian. Not as heavy-duty as some higher-end hardware, so if you open your windows dozens of times a day they might feel a bit light in the hand. Overall, these are a great budget-friendly fix for worn-out or broken window crank handles. They do exactly what they’re supposed to, with minimal fuss. Recommended for anyone needing a quick replacement without paying for more expensive hardware.

These are small and hseful handles, for smaller wimdows. Found one that had the lock screw painted shut but otherwise good items ...and they take little space

Screws may not recess fully but it works as intended. I thought the leverage may not be sufficient to open windows but to my surprise it worked really well and is low profile comparing to a full handle

J’avais besoin d’une poignée plus petite parce que mon ancienne dépassait de la fenêtre et avec l’achat de toiles, ça ne fonctionnait pas. Ces petites poignées sont très compactes, facile d’utilisation et économiques. Pourrait être un peu plus difficile à ouvrir pour les personnes ayant un problème de dextérité ou d’arthrite. Plusieurs commentaires disent qu’elles sont difficiles à installer mais c’est sans doute que ces personnes n’ont pas dévissé la petite vis avant de l’insérer. On devisse, on installe, on revisse et le tour est joué. (Voir photos) Très facile et jusqu’à maintenant, c’est parfait.

These were exactly what I needed! Our new home had built in window coverings with blackout curtains so the typical crank style knob was so difficult to maneuver to simply open the windows. It was a tight space between the window and the knob. But with these, opening the window is so easy and I actually prefer this style over the typical long crank. Very happy with this purchase.