BTF-LIGHTING FCOB COB 10MM 4PIN Connector Kit for PWM FCOB COB RGB LED Strip Lights,L-Shaped,Dual-End with Wire,Gapless Connector,Strip to Wire,4pin JST,4-PIN 22AWG

I'm very happy with this lighting. The dense lighting and then mounting in the rails that I got for them with the covers make them look like a nice just solid light. Messed with the right controller that they sell there's lots of capabilities and customization on how you light. How is a little intimidated when I bought them as they're not just stick on and go like other light systems. However it was not near as complicated As I feared and I like a much better than the common lights for behind TVs.

These worked out great for my under cabinet lighting! Very easy to use, no issues.

Fantastic pack to have if you’re working with FCOB lights. Buy this pack when you buy the lights. Save some aggravation.

The light strips are easy enough to work with, but the connectors are unforgiving. The connectors damage easily when installing, and they damage the end of the light strip if you need to remove them. The connectors also do not always make good connections with the wires. The light strips are good, but the connectors are not quite as good.

I used the 8mm, 2-connector version to connect COB LED strips from Home Depot. The original Home Depot kit came with a power supply, a lot of wire, including a Y-connector, but by itself was not adequate for a fairly small under-cabinet lighting project, because it didn't provide a way to make connections over short spaces. One issue I had was that I needed to put some of the lights on the bottom of an under-cabinet radio (remember those?), and with the original kit alone it was impossible to do that neatly. With these connectors I was able to cut the original strips *and* the wiring, and make new connections anywhere I needed them. I was even able to cut the pins off the end of the COB strips and insert the short stub with the pins into one of these connectors to make a new male or female pin connector on the end of a wire. The original 20 AWG wire also fitted into the connector, so I didn't need to use the wire that came with the kit - I have that for a future project. I had no problems making the connections - I used needle-nose pliers, so had to come in at an angle, but it probably would have been fine if I'd used a smallish pair of regular flat-end pliers. Every connection worked first time, and I had no damage. It took me a while to figure out which of the many kits available on Amazon was the right one for my project, but I'm very happy with this choice.

Don't waste your money on these things. Good idea in theory but they don't hold. The seem connected but if you go back to move the connection in the slightest, they pull apart or break the wires. Very disappointed in both these clips and the lights that these go with. I thought BTF has much better reviews and products but I was wrong and will be replacing these lights with another brand for sure.

Great item…

Used these in a kitchen remodel and provided the perfect lighting feature. Set up can be a bit tricky. But turned out great

Fonctionne beaucoup mieux que d'autres essayé. Les contacts sont parfaits. Toutefois, il est à noter qu'une fois installés, on ne peut plus les ouvrir pour modifier le filage.

Made connecting led strip for media wall effortless. Much easier than soldering!!

El producto es bueno y de calidad pero dicen es de 12 mm cuando es de 10, es la unica queja

No me gustaron ya que si por algun motivo elbseguro no agarra bien el cable y se suelta es muy dificil volverlo a utilizar

Funcionan bien 👍